Plate Loaded Machines

This T Bar Row supplied by Primal Strength focuses on the whole of the back and delivers strength increase and muscle growth.Heavy-duty 4mm Steel T-Bar RowAdjustable Width Handles With Multiple GripsExtended BullhornsBand Pegs for Additional ResistanceProduct careCleaning or disinfectant/sanitising spray should not be sprayed directly onto this product, it can remove the paint/ceramic coating/ionised/chromed finish and can cause rust. This product must only be used indoors in a temperature controlled environment and be left dry. Any damage to products from chemical cleaning products voids the product warranty.Additional informationWeight72.575 kgGross weight (kg)160.0Gtin5060492996156Net weight (kg)110.0Packing size (cm)209 x 108 x 46Product size (cm)212 x 104 x 52.5..

Anti-slip platforms for safety and stabilityFront-mounted plate holder, with low weight loading point for traditional row feelChoice of 3 wide and narrow grip handles for varied back isolationSilent motionRubber floor pads with floor fix optionSpecificationsL: 1300mm x W: 600mm x H:700mm..

Oversized Dual Pads and Foot Supports for Comfort and Muscle Isolation- Quick-Release, Multi-Adjustable Length & Height Set-Up- Power Band Pegs for Additional Power Training- Support Handles For Reverse Hypers- Commercial-Grade Steel, Powder Coated with a Lifetime Frame WarrantyWeight0.0 kgGross weight (kg)217Net weight (kg)171Packing size (cm)Packing size (cm) 200 x 70 x 48Product size (cm)194*117*128..

This Glute Hip Drive by Primal Strength is a focal exercise that increases your strength and range of motion via the glute muscles at the back of your hips.Primal Strength’s Glute Drive is the ultimate glute, hip drive machine. The machine is fully adjustable both in length and foot plate angle, allowing users to create the perfect hip thrust set-up.The Primal Strength Glute Drive has an oversized footplate with a fully rubberised, non-slip top layer. It has 5 different angle adjustments to create the perfect range and angle for each exercise and user type. The oversized plate allows for split stance and a wide range of foot placements.The back pad is made from urethane foam covered by double-stitched, rip resistant pad. The frame glides on sealed double bearings, release the metal pop pin to quickly adjust your set-up length.Primal Strength have designed an auto-locking belt so that any user size can quickly lock themselves in the machine. Most Glute Drives have an awkward adjustable belt or bar which takes far too long to set-up, especially if two different body types are training together. The belt is supported by a double stitched, rip-resistant covered foam pad which keeps users comfortable under heavy load with out losing the feel with a soft pad.The Primal Strength Glute Drive is backed with a Lifetime frame warranty and one years parts and labour warranty.Loadable Bullhorn Dimensions - 425mm x 50mmProduct careCleaning or disinfectant/sanitising spray should not be sprayed directly onto this product, it can remove the paint/ceramic coating/ionised/chromed finish and can cause rust. This product must only be used indoors in a temperature controlled environment and be left dry. Any damage to products from chemical cleaning products voids the product warranty.Additional informationWeight76.204 kgGross weight (kg)168.0Gtin5060492996903Net weight (kg)138.0Packing size (cm)170 x 75 x 51Product size (cm)210*176*78..

• The relationship between the seat and back pad automatically places the load correctly on the hips to avoid lower back injury• Compact footprint• Easy entry/ exit places user in a heads up position• Adjustable seat heightSpecificationsL: 1000mm x W: 700mm x H:1800mm..

• Anti-slip platforms for safety and stability• Articulating lifting arm• Footplates angled so that most of the bodyweight is supported by the legs and not the chest• Choice of 3 wide and narrow grip handles for varied back isolation• Rubber floor pads with floor fix optionSpecificationsL: 1300mm x W: 600mm x H:1600mm..

Weight56.245 kgGross weight (kg)124.0Gtin5060492997030Net weight (kg)118.0Packing size (cm)127 x 94 x 35Product size (cm)143*158*124..

Multi-functional unit that allows user to perform numerous exercises including squats, lunges, shrugs and dead lifts, whilst users feet stay firmly placed on the ground.Features• 2 Different weight loading points allows strength curve to be varied• 2 Handle height positionsSpecificationsL: 1400mm x W: 1500mm x H:1000mm..

The Primal Strength Plate-Loading ISO Lever Machines have been engineered to work in the natural motion of the body in order to optimise the isolation of the intended muscle groups. The Machines converge and diverge in a natural, arcing motion, guaranteeing users the maximum muscle contraction whilst providing the safety of a machine to maximise both the benefit and security for users when training.ISO Lever Plate-Loaded Machines have many benefits, including:Full range of depth for both Hack and Power SquatConverging or diverging range of motionSafely isolating muscle groupsMaximise weight used whilst applying a natural lifting motionThe Commercial Monster Series ISO V and Hack Squat provides users with a heavy duty, dual use machine, with the option of both a back-supported Hack Squat and a full front facing V Power Squat. The ISO Power/Hack Squat has been engineered to provide a full range of motion to isolate and develop the glutes, hamstrings and quadriceps. This unique machine can be used in a forward-facing position as a traditional, back-supported hack squat to isolate the quads and also in a machine-facing position, where it offers full-power squat motion. In both exercises, the body operates in an ergonomic and safe squatting motion. The angled foot-plate allows users to safely squat their maximum weight without having as much pressure on their lower back.The machine’s design allows comfortable use as either a single-leg or dual-leg hack squat. The extended weight-pin holders provide a high, maximum weight capacity and the non-slip, diamond-cut foot plates ensure user safety even when pressing a heavy load.The Commercial Monster Series ISO Power/Hack Squat is extremely heavy duty and is backed by a lifetime frame warranty. The ISO Power/Hack Squat is one of 8 Core Primal Strength ISO Machines and the range is perfect in any sports facility or commercial gym. It comes in Matte Nero with premium, rip-resistant pads.Product careCleaning or disinfectant/sanitising spray should not be sprayed directly onto this product, it can remove the paint/ceramic coating/ionised/chromed finish and can cause rust. This product must only be used indoors in a temperature controlled environment and be left dry. Any damage to products from chemical cleaning products voids the product warranty.Additional informationWeight106.594 kgEan5060492991021Gross weight (kg)235.0Gtin5060492991021Net weight (kg)190.0Packing size (cm)210 x 100 x 89Product size (cm)181 x 120 x 161WarrantyLifetime Frame. Full Commercial - Two Years Parts Dimensions: 181*120*161cm (LxWxH)..

The RAZE Standing Leg Curl is a great way to isolate the hamstrings in a safe & efficient way. The triple pad design encourages proper form by stabilising the knee, hips & upper body whilst allowing the working leg to execute the movement freely.Multi-position Removable Band PegsSwiveling, dual-position knee padMachine Weight: 100kg3 x weight plate storage holdersThick foam custom upholstery1300mm x 1350mm x 1420mm (LxWxH)Designed and manufactured in BritainThe RAZE Standing Leg Curl is manufactured to order and has a 6-week lead-time..

Features• Independent converging/diverging Lifting Arms with Range Limiters• Low profile with Compact Footprint• Additional rear plate storageSpecificationsL: 1100mm x W: 1400mm x H:1300mm..

Indexed spring assisted seat height adjustment incorporates stage load resistance system pivoting handles allow complete articulation of the wrist & elbow joints.Features• Indexed seat adjustment• Low weight loading point• 7 Start position optionsSpecificationsL: 1500mm x W: 1450mm x H:1200mmWeight: 150kg..